Mon–Fri 9am–5pm · (902) 755-6532

Indian Thunder Stroke · 2020–present

Indian Thunder Stroke 116 Horsepower Calculator

A stock Indian Thunder Stroke 116 makes about 85 hp and 116 ft-lb at the rear wheel. Found in the Indian Chief, Chieftain, Roadmaster, Springfield and Super Chief Limited. Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
85 hp
116 ft-lb
Stage 1
94 hp
126 ft-lb
Stage 2
101 hp
132 ft-lb
85 hp / 116 ft-lbDetails ↓

1Choose your engine

Indian Chief, Chieftain, Roadmaster, Springfield and Super Chief Limited.

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Air intake

A high-flow air cleaner lets the engine breathe.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

EFI tuner

Required on fuel-injected bikes once you change intake, exhaust or internals.

Camshaft

The single biggest bolt-in change to how your engine pulls.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Indian Thunder Stroke 116 makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
204060801002,0002,5003,0003,5004,0004,500Stock 85

Torque

ft-lb at the rear wheel
80901001101201302,0002,5003,0003,5004,0004,500Stock 90

Add parts or pick a stage above to compare your build with stock.

Indian Thunder Stroke 116 Stage 1 & 2 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—85116
Stage 1Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune)94126Open →
Stage 2Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune), Indian Motorcycle Stage 2 Performance Cams101132Open →

Best Cams for the Indian Thunder Stroke 116

Estimated rear-wheel output for every cam in our database on a Indian Thunder Stroke 116 with a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune (≈ 94 hp / 126 ft-lb before the cam).

CamCharacterEst. hpEst. ft-lbGain
Andrews TS570Mid-range104132+10 hp / +6 ft-lb
Indian Motorcycle Stage 2 Performance CamsMid-range101132+7 hp / +6 ft-lb
Andrews TS550Low-end torque101133+7 hp / +7 ft-lb

Want a side-by-side across all engines? See the Harley cam comparison chart.

Exhaust Options for the Indian Thunder Stroke 116

Estimated gain from each exhaust on a Indian Thunder Stroke 116 that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Indian Motorcycle Stage 1 MufflersSlip-on · Power+3 hp / +3 ft-lb

Indian Thunder Stroke 116 FAQ

How much horsepower does a stock Indian Thunder Stroke 116 make?

A healthy stock Indian Thunder Stroke 116 makes roughly 85 hp and 116 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Indian Thunder Stroke 116 make?

A Stage 1 Indian Thunder Stroke 116 (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 94 hp and 126 ft-lb at the rear wheel, about 9 hp more than stock. A typical parts list is the Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers and Dynojet Power Vision 3 (custom dyno tune).

How much horsepower does a Stage 2 Indian Thunder Stroke 116 make?

A Stage 2 Indian Thunder Stroke 116 (Stage 1 plus a performance cam) makes roughly 101 hp and 132 ft-lb at the rear wheel, about 16 hp more than stock. A typical parts list is the Indian Motorcycle Stage 1 High Performance Air Cleaner, Indian Motorcycle Stage 1 Mufflers, Dynojet Power Vision 3 (custom dyno tune) and Indian Motorcycle Stage 2 Performance Cams.

How much horsepower does a cam add to a Indian Thunder Stroke 116?

On top of a high-flow air cleaner, a 2-into-1 exhaust and a custom dyno tune, a cam takes a Indian Thunder Stroke 116 to roughly 101–104 hp depending on the grind. In our estimates the Andrews TS570 makes the most peak power (≈ 104 hp) and the Andrews TS550 makes the most torque (≈ 133 ft-lb).

Does a Indian Thunder Stroke 116 need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service