Mon–Fri 9am–5pm · (902) 755-6532

Revolution Max · 2021–present

Revolution Max 1250T Horsepower Calculator

A stock Revolution Max 1250T makes about 110 hp and 85 ft-lb at the rear wheel. Found in the Sportster S. Add the parts on your bike and the ones you're considering to estimate what your build will make.

Stock
110 hp
85 ft-lb
Stage 1
112 hp
91 ft-lb
110 hp / 85 ft-lbDetails ↓

1Choose your engine

Sportster S.

2Your parts

Tell us what's already installed on your bike, then pick what you'd like to add or upgrade. Choose a manufacturer, then the model, and we'll show the impact and flag any supporting parts it needs.

Quick start with a stage

Fills in a typical parts list for that stage. You can change any part afterwards.

Exhaust

2-into-1 systems make the most power. Slip-ons and drag pipes are mostly about sound.

Supporting parts

No horsepower on their own, but they keep a modified engine reliable.

Barnett Heavy-Duty Clutch SpringHolds the extra torque so the clutch doesn't slip.

Anything already done that isn't listed, like head work, compression pistons, a different throttle body or an older tune. It goes with your quote request but isn't included in the estimate.

Part availability and fitment vary by model and year. We confirm compatibility with your exact bike before ordering anything.

Estimated power curve

An illustration of where your Revolution Max 1250T makes its power, not a dyno chart. Peaks match the estimates above; the shape reflects your parts. Torque cams fatten the bottom end, top-end cams move power higher up the rev range, and big bores bring torque in earlier.

Stock

Horsepower

hp at the rear wheel
204060801001203,0003,5004,0004,5005,0005,5006,0006,5007,0007,5008,0008,5009,0009,500Stock 75

Torque

ft-lb at the rear wheel
304050607080903,0003,5004,0004,5005,0005,5006,0006,5007,0007,5008,0008,5009,0009,500Stock 42

Add parts or pick a stage above to compare your build with stock.

Revolution Max 1250T Stage 1 Horsepower

Estimated rear-wheel output for a typical build at each stage. These are common parts combinations, not the only way to build each stage. Open any of them in the calculator to swap parts.

StageTypical partsEst. hpEst. ft-lb
Stock—11085
Stage 1Zard GT / Top Gun Exhaust11291Open →

Exhaust Options for the Revolution Max 1250T

Estimated gain from each exhaust on a Revolution Max 1250T that already has a high-flow intake and a custom tune. 2-into-1 systems make the most power; slip-ons and drag pipes are mostly about sound.

ExhaustTypeEst. gain
Zard GT / Top Gun ExhaustFull system · Power+2 hp / +6 ft-lb

Revolution Max 1250T FAQ

How much horsepower does a stock Revolution Max 1250T make?

A healthy stock Revolution Max 1250T makes roughly 110 hp and 85 ft-lb of torque at the rear wheel. Factory figures are measured at the crankshaft, so they're higher than what a dyno shows at the wheel.

How much horsepower does a Stage 1 Revolution Max 1250T make?

A Stage 1 Revolution Max 1250T (high-flow air cleaner, 2-into-1 exhaust and a tune) makes roughly 112 hp and 91 ft-lb at the rear wheel, about 2 hp more than stock. A typical parts list is the Zard GT / Top Gun Exhaust.

Does a Revolution Max 1250T need a tune after an exhaust or air cleaner?

Yes. A freer intake or exhaust makes a fuel-injected engine run lean on the stock tune, which costs power and adds heat. A tuner like the Dynojet Power Vision with a custom dyno tune gets the full gain.

Other Engines

Build it with Arch Customs

Harley-Davidson specialists in Stellarton, Nova Scotia. We install, tune and dyno every part in this calculator.

Start from intake, exhaust & tune →
(902) 755-6532
Book Service