Mon–Fri 9am–5pm · (902) 755-6532

Free Tool

Harley RPM at Speed & Gear Ratio Calculator

See engine rpm at highway speed in every gear, top-gear speed at redline, and what a rear pulley or tire size change does to your cruising rpm and speedometer.

Overall gear ratios

Find these under "Gear ratios (overall)" on your bike's spec sheet.

Rear tire
Compare a change

Try a different pulley or tire size and see how rpm, top speed and your speedometer change.

Top gear at 110 km/h
2,561 rpm
Top gear: speed per 1,000 rpm
43.0 km/h
So 3,000 rpm in top gear is about 129 km/h.
Speedometer after change
Enter a pulley or tire change to see the speedometer error.
GearOverall ratiorpm at 110 km/hMax speed in gear*
19.5938,54474 km/h
26.6505,923107 km/h
34.9384,398144 km/h
44.0003,563178 km/h
53.4073,035Gearing limit only
62.8752,561Gearing limit only

* The speed where the engine reaches the 5,750 rpm redline in that gear, which is useful for knowing when to shift in the lower gears. In the top gears the engine runs out of power and fights wind resistance long before redline, so real top speed is much lower than the gearing allows.

Tire circumference 2058 mm, calculated from the tire size. Real rolling circumference is usually 2–3% smaller because the tire compresses under load, so real rpm runs slightly higher than shown.

Gearing FAQ

How do I lower my Harley's highway rpm?

Fit a smaller rear pulley or a larger front pulley (a taller final drive), or a taller rear tire. Each lowers engine rpm at a given speed, but costs some acceleration. A 6-speed overdrive conversion is another option on older 5-speed bikes.

Will changing my rear pulley throw off the speedometer?

Yes. Harley speedometers read speed from a sensor in the transmission, so a pulley or rear tire change makes the speedometer read high or low. A tuner like the Dynojet Power Vision can recalibrate it. This calculator shows roughly how far off it will be.

What is an overall gear ratio?

It's the primary ratio, the transmission gear ratio and the final drive ratio multiplied together: how many times the engine turns for each turn of the rear wheel in that gear. Harley-Davidson lists overall ratios for each gear on its model spec sheets.

Is a lower rpm at highway speed better?

It's quieter and smoother, but a big-twin needs to stay in its torque band to pull well. Very low cruising rpm can mean downshifting for every hill or pass. A torque cam often suits taller gearing better than a top-end cam.

Changing your gearing?

We fit pulleys, belts and tires and recalibrate your speedometer, at our shop in Stellarton, Nova Scotia. See how a cam or tune changes your torque curve in the horsepower calculator.

Request a quote
(902) 755-6532
Book Service